Updated 17 Nov 2026
Swap USDT BEP20 to ERC20, and receive it on Ethereum
Send USDT on BNB Chain and get USDT on Ethereum, with no account. The quote lists Relay's rate, both fees and the minimum before any BNB Chain transfer leaves your wallet.
- No account
- Fees shown first
- Non-custodial
- BNB Chain to Ethereum
Your receiving and refund addresses are checked against the US sanctions list before you swap.
Why swap USDT BEP20 to ERC20 here
Relay's quote for this pair
On 16 November 2026, 500 USDT on BNB Chain was quoted at about 496.383 USDT on Ethereum through Relay, with a 0.42% Relay fee. The rate already had our 0.3% taken out.
Nothing to sign up for
Give the Ethereum address for the USDT and send from a BNB Chain wallet or an exchange. You don't hand over an email or open an account.
Non-custodial
The BEP20 USDT goes to Relay's one-time deposit address, and the ERC20 USDT comes to your 0x address on Ethereum. Plaxswap only ends up holding coins when a BEP20 swap sent from an exchange fails.
Minimum stated up front
For that 500 USDT quote the minimum was 493.901 USDT on Ethereum. Relay cancels or refunds a BEP20 to ERC20 swap it can't fill to that level.
How to swap or convert USDT BEP20 to ERC20
Three steps, and nothing happens until you send coins.
Pick the networks
Set USDT on BNB Chain (BEP-20) as the coin you send and USDT on Ethereum (ERC-20) as the one you receive, then type how much BEP20 USDT you want to move.

Compare the routes
Relay's quote shows the rate, our fee, its fee, the time and the least USDT that will reach Ethereum. With a connected BNB Chain wallet, the form may offer to cover the BNB network fee and add its cost to the fee shown.

Add your address and send
Paste the Ethereum address that should get the USDT. Send the BEP20 USDT to the one-time deposit address, or approve the swap in your connected wallet, and watch the page until the ERC20 USDT arrives.

Fees, time and networks
What a USDT BEP20 to ERC20 swap costs on the form on this page. Every route shows its own figures before you swap.
Swap form fees and time
- Plaxswap fee
- 0.3% on every route, taken inside the swap
- Route's own fee
- Shown on each route. Relay's fee on 500 USDT from BEP20 to ERC20 was 0.42% on 16 November 2026
- Network fees
- Included in the quote, plus the BNB your wallet pays to send the BEP20 USDT. With a connected wallet, Plaxswap may send that BNB first and add its cost plus a margin to the fee shown, within a cap per day and per swap
- Usual time
- Each route shows its own and the figures change. Relay showed about 5 seconds for BEP20 to ERC20 on 16 November 2026, an estimate that moves a lot
- Minimum
- Each route has its own, and the form warns you when a BEP20 amount is too small
- Maximum
- Plaxswap sets none
Supported networks
- BNB Chain (BEP20)For sending USDT. Addresses start with 0x, and fees are paid in BNB
- Ethereum (ERC20)For receiving USDT. Addresses also start with 0x, so check the network as well as the address
A BNB Chain address and an Ethereum address look the same, so the network you choose in your wallet or on the exchange's withdrawal screen decides where the USDT goes. Send on BEP20, and give an address from an Ethereum wallet you control.
About moving USDT from BNB Chain to Ethereum
People convert USDT BEP20 to ERC20 when the person or service they're paying wants USDT on Ethereum, or when they want to use it in an app that runs there. The coin stays Tether USD. Only its network changes, from BNB Chain, where fees are paid in BNB, to Ethereum, where fees are paid in ETH.
Ethereum is usually the most expensive of these networks to use. The quote covers the network fees for getting the USDT there, but moving it again from your Ethereum wallet will cost ETH, and that fee is usually higher than what BNB Chain charges.
On 16 November 2026, Relay quoted 1 BEP20 USDT at 0.9927656 ERC20 USDT, with our 0.3% and its 0.42% fee included. On 500 USDT that left about 496.383 for your Ethereum address, with a minimum of 493.901.
The real danger on this pair is the address. Both networks use addresses starting with 0x, so a wallet will take an Ethereum address on BNB Chain without complaint, and the other way round. Choose the network on purpose each time, because USDT sent on the wrong one may be lost.

Before you swap
- Payments on BNB Chain can't be undone. Check the Ethereum address you paste for the USDT before you send anything.
- Send only USDT on BNB Chain (BEP20) to the deposit address. ERC20 USDT or any other token sent there may be lost.
- If Relay can't finish, the BEP20 USDT goes back to the wallet that sent it, and Plaxswap charges no fee on the refund. From an exchange, a failed swap goes to a Plaxswap wallet first and support returns it, less the network fee.
- Keep BNB in the sending wallet for the network fee, and ETH in the Ethereum wallet if you'll move the USDT again.
- A swap may count as a sale for tax where you live, so check the local rules before a large BEP20 to ERC20 swap.
- The swap form is closed in 7 countries because of sanctions or FATF rules. The compliance policy lists them.
See the swap form
Real screenshots of the swap form with 500 USDT on BNB Chain going to Ethereum, taken on 16 November 2026. The form above always shows the current rate and fees.


Swap form or app and API: how pricing differs
You're using the swap form on this page, so the fees above are the ones you pay. Orders made in the Plaxswap app, with a payment link or through the API are priced differently.
| What you compare | Swap form on this page | Plaxswap app, payment links and API |
|---|---|---|
| Our fee | 0.3% on every route, taken inside the swap | A 0.50% spread in the rate right now. Payment links add 0.50% |
| Other costs | The route's own fee and the network fees, all in the quote | Network fees, about $0.66 right now |
| Who handles the coins | A route such as Relay. For USDT sent on BEP20 to ERC20, Plaxswap receives the coins in one case only: a failed swap sent from an exchange to a Relay address starting with 0x | Plaxswap carries out the order and sends the payout |
| The rate | Quoted by the route, with a minimum you'll receive | Set when your deposit confirms. A payment link locks the amount the payee receives |
| Limits | Each route has its own minimum. Plaxswap sets no maximum | Shown on the order |
| Usual time | Shown on each route | About 4 min |
You don't need the app or the API to use the form on this page. See how the rate is set on orders or all fees, by where you swap.
Current rate and limits for orders
Questions about swapping USDT BEP20 to ERC20
How do I convert USDT BEP20 to ERC20?
Set USDT on BNB Chain as the coin you send and USDT on Ethereum as the coin you receive, enter the amount and read Relay's quote. Paste your Ethereum address, then send the BEP20 USDT to the deposit address or approve it in a connected wallet. The ERC20 USDT lands at your 0x address.
How long does a USDT BEP20 to ERC20 swap take?
On 16 November 2026 Relay put it at about 5 seconds for 500 USDT. Relay's estimates swing a lot, so treat that as one reading and look at the form on the day. The BNB Chain deposit confirms first, then the USDT is sent on Ethereum.
What will I pay to exchange USDT BEP20 to ERC20?
Three things sit inside the quote: the 0.3% Plaxswap fee, Relay's fee and the network fees. Relay's part was 0.42% on 500 USDT on 16 November 2026, for about 496.383 USDT on Ethereum. You also pay BNB to send from your wallet, or your exchange's withdrawal fee.
What is the smallest USDT BEP20 to ERC20 exchange?
There's no fixed number on this page, because Relay sets its own minimum and it can move. Type your amount and the form will say if it's too small. With small sums, compare what you send with the USDT you'd get on Ethereum before you go ahead.
Is this the same as a BEP20 to ERC20 bridge?
In plain terms, yes. Swapping, exchanging, converting and bridging all describe the same result here: USDT leaves BNB Chain and USDT arrives on Ethereum. The form also works as a BEP20 to ERC20 converter, so you can type any amount and see the outcome without an account.
Can I withdraw BEP20 USDT from an exchange straight to the deposit address?
Yes, if the exchange sends it on BNB Chain (BEP20) and you withdraw the exact amount shown. Should the swap fail, Relay can't return coins to an exchange, so they go to a Plaxswap wallet and support sends them back to you, less the network fee.
What if I sent the USDT on the wrong network?
Contact support with the transaction hash. Be realistic, though: USDT sent to this BEP20 deposit address on Ethereum, Polygon or any other network may be lost, and the 0x address won't warn you. Read both network names twice before you confirm.
Which gas coin do I need for BEP20 to ERC20?
BNB, to send the USDT from BNB Chain, unless the form offers to send it for you through a connected wallet. The quote covers the Ethereum side. Moving the ERC20 USDT later will need ETH in that wallet.
Related swaps and guides
Ready to move your BEP20 USDT to ERC20?
Enter the BEP20 amount and Relay's quote appears with every fee. There's no account, and nothing leaves your wallet until you send.
Start your swap- Non-custodial routes
- Every fee shown first
- Addresses checked against the US sanctions list
- Human support